Description
Broadcast-Ready Sound Straight Out of the Box
Designed for podcasters, livestreamers, voiceover artists, and broadcasters, the sE Electronics DynaCaster DCM6 eliminates the need for external inline preamps, bulky shockmounts, and camera-blocking pop shields. Its custom-developed front-addressed cardioid dynamic capsule is tuned specifically for speech, isolating your voice from room reflections, keyboard clicks, and fan noise while keeping your on-camera setup clean and unobstructed.
Designed for podcasters, livestreamers, voiceover artists, and broadcasters, the sE Electronics DynaCaster DCM6 eliminates the need for external inline preamps, bulky shockmounts, and camera-blocking pop shields. Its custom-developed front-addressed cardioid dynamic capsule is tuned specifically for speech, isolating your voice from room reflections, keyboard clicks, and fan noise while keeping your on-camera setup clean and unobstructed.
Key Features
- Built-In DYNAMITE Preamp (+30 dB Clean Gain). Engage the rear red push button with +48V phantom power from your audio interface or mixer to unlock an instant +30 dB of transparent, low-noise gain—no external Cloudlifter or mic activator required.
- Active or Passive Operation. Works as an active high-output mic with +48V phantom power engaged, or runs passively without phantom power on high-gain preamps.
- Tailored Cardioid Capsule for Speech. Uses a custom dynamic capsule with a neodymium magnet and copper voice coil to deliver warm, natural vocal clarity while rejecting off-axis room noise.
- Integrated Pop Filter. Built-in multi-layer plosive protection tames harsh “P” and “B” sounds without obstructing your face on camera.
- Patented Internal Shockmount. Isolates the microphone capsule from desk bumps, boom arm adjustments, and footfall vibrations without needing an external cradle mount.
- High-Swivel Stand Mount & All-Metal Body. Housed in a dent-proof, corrosion-free all-metal chassis with a wide-swivel mount and gold-plated 3-pin XLR connector for dependable daily use.
What’s in the Box
- sE Electronics DynaCaster DCM6 Dynamic Broadcast Microphone
- 5/8″ to 3/8″ Mic Stand Thread Adapter
- sE Logo Sticker
- User Manual with Warranty Card
Quick Specs
- Microphone Type. Front-addressed active/passive dynamic (Cardioid)
- Frequency Range. 40 Hz – 18 kHz
- Sensitivity. 2.5 mV/Pa (-52 dBV) passive / 79 mV/Pa (-22 dBV) with DYNAMITE active
- Electrical Impedance. 600 Ohms passive / 135 Ohms active
- Power Requirement. +48V phantom power (3.1 mA current consumption, required only for +30 dB DYNAMITE mode)
- Connector. 3-pin gold-plated male XLR
- Dimensions. 158 (L) x 86 (W) x 62 (H) mm
- Weight. 518 g




Reviews
There are no reviews yet.